KAYFUN MINI V3

Notify me when available

Verfügbarkeit: Nicht auf Lager

99,95 €

View more in the following categories:

Artikelbeschreibung

Details

 

KAYFUN MINI V3


The SvoëMesto Kayfun Mini V3 is a rebuildable tank atomizer specifically designed using e-liquid for electronic cigarettes. Before use you must install a coil made intended for usage in electronic cigarettes.

Before anything else, vaping should be:

  • convenient
  • intuitive
  • reliable
  • and enjoyable.

The Kayfun Mini V3 combines simplicity, functionality and excellent performance in a very compact form factor. Its easy handling and intuitive features make it a perfect playground for all vapers new to rebuilding and a reliable companion for experienced users.

SCOPE OF DELIVERY

  • 1 x Kayfun Mini V3
  • 1 x spare kit
  • 1 x manual

SURFACE

  • stainless steel, brushed

MEASUREMENTS

 

MATERIALS USED
We at SvoëMesto attach great importance in using only the best and most appropriate materials. A list of the materials used for this product can be found below. If you have known allergies to one or more of these materials, we do not encourage the use of this product.

COMPONENT                                                                         MATERIAL
Stainless steel                                                      WNr. 1.4404 (X2CrNiMo17-12-2),
components                                                                       AISI 316L, (V4A)
Glass-tank-sleeve                                                           Borosilicate glass
Insulators                                                                                  POM-C
O-rings                                                                                     NBR 70

Features

 

Functions explained
Tipps and tricks on how to use the Kayfun Mini V3

Assembly:

 

Assembly is easier than it has ever been. Within seconds the Kayfun Mini V3 is stripped to its pieces for cleaning or maintenance.

HINT: After cleaning or before first use, lubricate both o-rings below the deck. This will make the liquid control operate more smoothly and prevents wear and tear on the o-rings.

 

Rebuilding:

 

Not only is rebuilding the Kayfun Mini V3 very intuitive, thanks to the improved pressure based feeding system, your built doesn’t have to be flawless to achieve good results. This makes the Kayfun Mini V3 an ideal playground and a reliable daily driver for vapers new to rebuilding and experienced vapers alike.

ATTENTION: Always make sure before use that the positive terminal block remains in a centered position and does not ouch the outer deck, which would cause a short circuit.

Always make sure the exceeding leads of your wire are cut flush to the deck. In case the touch the surrounding housing they may cause a short circuit or an unstable connection.

 

Liquid Control:

 

 

The liquid control of the Kayfun Mini V3 gives you full control over the saturation of your wick. It’s easily adjusted from the outside.
When it is fully closed, simply turn the tank two full turns in an unscrewing motion to open the liquid channels.
In case you want to fine tune or restrict the liquid flow, the liquid channels show visibly how wide open your liquid control is.

HINT: After cleaning or before first use, lubricate both o-rings below the deck. This will make the liquid control operate more smoothly and prevents wear and tear on the o-rings.

Filling:

 

 

Filling the tank of the Kayfun Mini V3 is quick and easy.

  • Close the liquid control
  • unscrew the topcap
  • fill the tank
  • put the topcap back on
  • open the liquid control 

Accessing the deck:

 

 

The build deck of the Kayfun Mini V3 can be accessed any time, regardless whether the tank is filled or not.

Adjusting the airflow:

 

 

The airflow of the Kayfun Mini V3 can be adjusted continuously to your liking.

  • Remove the 510 screw
  • Insert a small flathead screwdriver into the 510
  • Place the atomizer to your lips
  • By turning the screwdriver you can tighten or loosen the airflow.
  • Reassemble after you found a setting you enjoy.

ATTENTION: When screwing the 510 screw back in do not apply force. Otherwise you may twist the internals which can cause a short circuit.

HINT: Do not back out the internal grub screw too far. Otherwise it might block the 510 pin. To maintain a solid connection the 510 screw has to be tightened finger tight.

MANUALS

Manual – Kayfun Mini V3

 Bedienungsanleitung – Kayfun Mini V3

 

Zusatzinformation

Zusatzinformation

Hersteller SvoeMesto

Kundenmeinungen

Schreiben Sie Ihre eigene Kundenmeinung

Nur registrierte Kunden können Bewertungen abgeben. Bitte melden Sie sich an oder registrieren Sie sich

Zahlung & Versand

Zahlungsmethoden

      1. Paypal

     2. Credit Karten

     3. Überweisung auf unser Bank Konto

          Bank: Eurobank EFG

          Name : Vasileios Papakonstantinou

          ΙΒΑΝ : GR3002601750000450200739241 

          BIC/Swift: ERBKGRAA

          Strasse: Gounari 73

          Stadt: Athen (Glyfada)

          Plz: 16674

          Land: Griechenland

 

Versand Optionen:

      1. DHL Express Internationaler Versand

      2. FedEx Express Internationaler Versand

      3. Kleinteile Versand bis 50 euro, ohne versicherung & ohne Sendenummer als normaler Brief (auf eigene Gefahr)